 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Power Transistors 2SA0885 (2SA885) Silicon PNP epitaxial planar type Unit: mm For low-frequency power amplification Complementary to 2SC1846 I Features * Output of 3 W can be obtained by a complementary pair with 2SC1846 * TO-126B package which requires no insulation plate for installation to the heat sink 8.0+0.5 -0.1 3.160.1 3.80.3 11.00.5 3.20.2 1.90.1 I Absolute Maximum Ratings TC = 25C Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Peak collector current Collector current Collector power dissipation Symbol VCBO VCEO VEBO ICP IC PC Tj Tstg Rating -45 -35 -5 -1.5 -1 1.2 *1 0.750.1 0.50.1 0.50.1 1.760.1 2.30.2 3 Unit V V V A A W C C 4.60.2 16.01.0 1 2 1: Emitter 2: Collector 3: Base TO-126B Package 5 *2 Junction temperature Storage temperature 150 -55 to +150 Note) *1: Without heat sink *2: With a 100 x 100 x 2 mm A1 heat sink I Electrical Characteristics TC = 25C Parameter Collector cutoff current Symbol ICBO ICEO Emitter cutoff current Collector to base voltage Collector to emitter voltage Forward current transfer ratio IEBO VCBO VCEO hFE1 * Conditions VCB = -20 V, IE = 0 VCE = -20 V, IB = 0 VEB = -5V, IC = 0 IC = -10 A, IE = 0 IC = -2 mA, IB = 0 VCE = -10 V, IC = -500 mA VCE = -5 V, IC = -1 A IC = -500 mA, IB = -50 mA VCB = -10 V, IE = 50 mA, f = 200 MHz VCB = -10 V, IE = 0, f = 1 MHz Min Typ Max - 0.1 -100 -10 -45 -35 85 50 - 0.5 200 20 30 340 3.050.1 Unit A A A V V hFE2 Collector to emitter saturation voltage Transition frequency Collector output capacitance Note) *: Rank classification Rank hFE1 Q 85 to 170 R 120 to 240 VCE(sat) fT Cob V MHz pF S 170 to 340 Note.) The Part number in the Parenthesis shows conventional part number. 1 2SA0885 PC T a 6 Power Transistors IC VCE -1.5 TC=25C -1.25 IB=-10mA -9mA -8mA -7mA -6mA -0.75 -5mA -0.5 -4mA -3mA -0.25 -2mA -1mA -1.0 -1.2 VCE=-10V TC=25C IC I B Collector power dissipation PC (W) 5 (1)With a 100x100x2mm Al heat sink (2)Without heat sink 4 (1) 3 -1.0 Collector current IC (mA) Collector current IC (A) -0.8 -0.6 2 (2) -0.4 1 -0.2 0 0 20 40 60 80 100 120 140 160 180 200 0 0 -2 -4 -6 -8 -10 0 0 -2 -4 -6 -8 -10 -12 Ambient temperature Ta (C) Collector to emitter voltage VCE (V) Base current IB (mA) VCE(sat) IC Collector to emitter saturation voltage VCE(sat) (V) -10 VBE(sat) IC Base to emitter saturation voltage VBE(sat) (V) IC/IB=10 -10 IC/IB=10 1000 hFE IC VCE=-10V TC=100C 300 25C -3 -3 Forward current transfer ratio hFE -1 -1 TC=-25C 100C 100 -25C -0.3 25C -0.1 TC=100C -25C -0.3 25C 30 -0.1 10 -0.03 -0.03 3 -0.01 -0.01 -0.03 -0.1 -0.3 -1 -0.01 -0.01 -0.03 -0.1 -0.3 -1 1 -0.01 -0.03 -0.1 -0.3 -1 Collector current IC (A) Collector current IC (A) Collector current IC (A) f T IE 200 50 Cob VCB -100 VCER RBE Collector to emitter voltage VCER (V) IE=0 f=1MHz TC=25C IC=-10mA TC=25C Collector output capacitance Cob (pF) Transition frequency fT (MHz) VCB=-10V 180 f=200MHz TC=25C 160 140 120 100 80 60 40 20 0 1 3 10 30 100 45 40 35 30 25 20 15 10 5 0 -1 -80 -60 -40 -20 -3 -10 -30 -100 0 0.1 0.3 1 3 10 30 100 Emitter current IE (mA) Collector to base voltage VCB (V) Base to emitter resistance RBE (k) 2 Power Transistors ICEO Ta 104 VCE=-10V -10 -3 ICP 103 2SA0885 Area of safe operation (ASO) Single pulse TC=25C Collector current IC (A) -1 -0.3 IC t=10ms t=1s ICEO (Ta) ICEO (Ta=25C) 102 -0.1 -0.03 -0.01 -0.003 10 1 0 20 40 60 80 100 120 140 160 -0.001 -0.1 -0.3 -1 -3 -10 -30 -100 Ambient temperature Ta (C) Collector to emitter voltage VCE (V) 3 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR |
Price & Availability of 2SA885
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |